Small size shredder suitable for shredding long and skein shavings containing solids.
It is ideal to be positioned under the machine tool conveyor.
The shredder TALBI400 is a machine designed and built to crush metal shavings and long skein. The name is an acronym for “ slow twin-shaft crusher”. One set of knives assembled on each rotary beam, crosses a comb counter-knife to create the cutting effect. Below the two rotors that are moved by two 3 kW motors, an interchangeable screen is installed, which defines the crushed chips size. This screen can be opened by removable metal rods or a handwheel to remove any pieces that have fallen into the crusher. The TALBI400 shredder can reduce 5 times the initial volume.The reduction efficiency of the swarf volume and the hourly output of the TRA200 shredder can be evaluated with experimental tests on your swarf at the headquarters of the company FAMA s.r.l.
Note: The TALBI400 shredder is not suggested in case of chips containing solid parts, as it is not equipped with an ejection system. In case of shavings containing parts it is preferable to use the FAMA TRABI400 shredder.
download TALBI400 crusher product sheet [ pdf - 308 Kb ]
|Q = 0,6 mc/h||Brass||Steel||Aluminium||Stainless steel||Copper||Cast iron|
The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.
60 ÷ 200 kg/h
180 ÷ 400 kg/h
200 ÷ 400 kg/h
300 ÷ 1000 kg/h
300 ÷ 1000 kg/h
60 ÷ 200 kg/h with parts ejector
60 ÷ 400 kg/h with parts ejector
120 ÷ 800 kg/h with parts ejector
270 ÷ 1800 kg/h with parts ejector