Costumized solutions for the treatment of processing waste
Home Metal chips

Home Metal chips
Metal chips

Crushers

TTC400

Metal chips

Vertical crusher for long and tangled metal shavings. It is a machine suitable for different applications, both for small treatment groups and for centralized systems. It is equipped with an automatic ejector of parts.



TTC400
  • Structure and case made of sturdy painted metalwork
  • Knives and shredding counter knives in wear-resistant material
  • Automatic ejection system for non-shreddable parts
  • Effort ontrol by clutch
  • Clutch system in alternate direction Customizable crushing shroud

The TTC400 crusher is a machine conceived and designed to shred long and skein-type metal swarf. It is a machine suitable for different applications, both for small treatment systems and for centralised systems.

The swarf loaded in the hopper is dismembered by a hooked arm which performs pre-shredding and conveys the swarf to the actual grinding point. The skein is then shredded and discharged from below.

Where there is a non-shreddable piece that interferes with the process, the machine automatically ejects it through a side container controlled by two air cylinders.

The unit is powered by a 5.5 kW geared motor with chain transmission and clutch.


EXPLORE

download TTC400 crusher product sheet [ pdf - 1124 Kb ]

DIMENSIONS
1300x500x1000H mm
POWER
5,5 kW
VOLTAGE
230/400 V
POWER SUPPLY
Continuous
RPM
63 rpm
WEIGHT
650 kg
HOURLY PRODUCTION

Q = 0,6 mc/h Ottone Acciaio Alluminio Inox Rame Brass Steel Aluminium Stainless steel Copper Cast iron
density [kg/dmc] 0,5 0,65 0,3 0,6 0,5 -          
Kg/h 300 390 180 360 300 -          

The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.

POSSIBLE APPLICATIONS

AVAILABLE OPTIONALS
FURTHER TECHNICAL <b>CARACTERISTICS</b>
FURTHER TECHNICAL CARACTERISTICS
  1. The crusher can be loaded by overturning a trolley in the hopper or by a conveyor
  2. Different types of hopper can be installed on the top of the crusher, depending on the needs and loading methods
  3. The rotor and the dismemberment shaft of the coil are replaceable
  4. The number of counter knives to be applied to the crusher depend, by shape and number, on the type of the swarf
  5. The machine can be configured with different types of knives (slot size)
  6. The swarf may contain some sporadic pieces (end of bar, bar headers, machined, ...) which, depending on the size, will be crushed or automatically ejected

OTHER PRODUCTS IN THE RANGE

TTC200

Vertical crusher
60 ÷ 200 kg/h

TTC400i

Vertical crusher
200 ÷ 400 kg/h

TTC1000

Vertical crusher
300 ÷ 1000 kg/h

TTC1000i

Vertical crusher
300 ÷ 1000 kg/h

TRA200

Horizontal shredder
60 ÷ 200 kg/h with parts ejector

TRABI400

Horizontal shredder
60 ÷ 400 kg/h with parts ejector

TRABI600

Horizontal shredder
120 ÷ 800 kg/h with parts ejector

TRABI1000

Horizontal shredder
270 ÷ 1800 kg/h with parts ejector

TALBI400

Horizontal shredder
60 ÷ 400 kg/h

Centrifuges
Swarf treatment groups