Vertical crusher for long and tangled metal shavings. It is a machine suitable for different applications, both for small treatment groups and for centralized systems. It is equipped with an automatic ejector of parts. The unit is driven by a hydraulic motor powered by a control unit.
The TTC400i crusher is a machine conceived and designed to shred long and skein-type metal swarf. It is a machine suitable for different applications, both for small treatment systems and for centralised systems.
The swarf loaded in the hopper is dismembered by a hooked arm which performs pre-shredding and conveys the swarf to the actual grinding point. The skein is then shredded and discharged from below.
Where there is a non-shreddable piece that interferes with the process, the machine automatically ejects it through a side container controlled by two air cylinders.
The unit is driven by a hydraulic motor powered by a control unit.
download TTC400i crusher product sheet [ pdf - 1064 Kb ]
|Q = 0,6 mc/h||Ottone||Acciaio||Alluminio||Inox||Rame||Brass||Steel||Aluminium||Stainless steel||Copper||Cast iron|
The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.
The hydraulic control unit is fitted with an 11 kW electric motor
The rotor and the skein dismembering shaft are replaceable
60 ÷ 200 kg/h
180 ÷ 400 kg/h
300 ÷ 1000 kg/h
300 ÷ 1000 kg/h
60 ÷ 200 kg/h with parts ejector
60 ÷ 400 kg/h with parts ejector
120 ÷ 800 kg/h with parts ejector
270 ÷ 1800 kg/h with parts ejector
60 ÷ 400 kg/h