Costumized solutions for the treatment of processing waste
Automatic centrifuge for metal chips suitable for separating the cooling lubricant.
It is a small centrifuge, ideal to be installed under the machine or to be integrated in a small treatment group. The discharge of the treated chip is located in the upper part of the centrifuge body.
The FC200 centrifuge is a unit suitable for centrifuging metal, ferrous and non-ferrous swarf, in order to recover the cooling lubricant used by the machine tool in the production process.
The FC200 centrifuge is designed for continuous feeding and for the treatment of short swarf, not exceeding 2 cm in length.
Under optimal conditions, the FC200 centrifuge allows to obtain swarf with a wet content that can reach up to 1.5%.
The actual efficiency of the centrifuge, as well as the hourly flow rate, depends on the characteristics of the swarf, in particular the material, the shape, the weight per unit of volume, as well as the starting humidity and can be confirmed by testing your swarf at our premises. If there are pieces in the swarf, such as bar headers, semi-finished products or bar ends, the FC200 centrifuge should be equiipped with a sieve.
EXPLORE
download FC200 automatic centrifuge product sheet [ pdf - 1928 Kb ]
| HOURLY PRODUCTION |
| Q = 150 l/h | Brass | Steel | Aluminium | Stainless steel | Copper | Cast iron |
| density [kg/l] | 1,30 | 1,20 | 0,40 | 1,00 | 0,80 | 1,30 |
| Kg/h | 200 | 180 | 60 | 150 | 120 | 200 |
The data in kg/h is approximate and in any case depends on the density of the swarf, the shape, the oil content and the type of coolant. the density data considered are hypothetical, based on an experimental average of the data in our possession.
